| ITEM: MAKING BRACKETS TO SUIT ILLUMINATED SIGNS, BOX
FRAMED SIGNS DESCRIPTION: This
bracketing method can be used for both Sign One 80mm ( 3 1/4") round and 100mm
( 4") square posts.
CONSTRUCTION: Brackets indicated as
A and B are recommended to be manufactured from aluminium of a suitable size and temper,
to hold stresses relevant to wind loads of finished sign. Check with engineer to
suitability.
| SPECIFICATION: |
| STEP 1: |
A – cut aluminium 90o angles
to required length of sign |
| STEP 2: |
B – cut aluminium
90o angles to required length of sign |
| STEP 3: |
C – mechanical fix "B"
angle inside A angle * |
| STEP 4: |
D – mechanical fix assembled bracket
to illuminated cabinet |
| STEP 5: |
E – slot infill section P1484R with
circular saw or router to required dimension to allow bracket to slide inside, and slide
into post (optional) |
| STEP 6: |
F – slide bracket with sign attached into
post (with optional infill) |
| STEP 7: |
G – cap off with suitable cap and
mechanically fixing |
|
* NB. Welding can be
substituted for mechanical fixing. |
With the correct selection of A and B
sections, you can create virtually concealed fixings
Can be used for both 80mm
( 3 1/4") round and 100mm ( 4")
square Sign One post sections
ENGINEERS SPECIFICATIONS: Should
be sought to ensure size/suitability of the system by user prior to use.
APPLICATIONS: Where the finished
application requires hidden or discreet fixings such as maps, small scale cabinets,
internal cabinets, prestige environments and applications where the sign or cabinet needs
to be changed by slide in/slide out method. |