| ITEM: P1485R SIGN ONE POST 80mm ( 3
1/4") P1484R SIGN ONE INFILL AND FRAME
DESCRIPTION: 80mm ( 3
1/4") Post and frame
step by step guide. See items individually for details on their features.
CONSTRUCTION & ASSEMBLY GUIDE No. 1
– STANDARD FRAME:
| Step 1: |
A. Cut frame to required length and
mitre corners to 45o |
| Step 2: |
B. Notch back horizontal pieces to
allow clearance into opening recess (required for sliding into posts, not required when
using frame alone) |
| Step 3: |
C. Using the Vee groove in the back of
the frame as centre, drill hole to align with screw flute and using a metal thread 8 gauge
screw assemble sign frame. |
| Step 4: |
D. Cut face stock and allow clearance
to slide into post and then run a bead of suitable premium glue along recessed fin (see
4409RRR) |
| Step 5: |
Carefully place sign face to recessed fin and
press down firmly, cleaning off excess glue if required. |
| Step 6: |
E. Determine post lengths and cut to
size |
| Step 7: |
F. Cut the infills to required length,
small sections can be cut to provide spacers between sign panels.
Hot Tip: If you are concreting posts into the ground, cut a small infill and screw it into
a position level with the top of the hole. This will leave the bottom of the post open to
allow the concrete to flow into the cavity which enhances the installation and saves
infill, whilst also allowing removal of infill for cutting down to allow space when adding
signs! |
| Step 8: |
Slide your finished sign
frame into recess fin of sign post and then slide in infill.
Another "Hot Tip" is to again use a small section of infill
at the bottom of the post to close off and hold in place assembled
items (for ease of assembly and transport). |
| Step 9: |
G. Using your
selected cap, either screw flat cap to top of post by utilising screw
flute or press in cast aluminium cap into top of post and drill post
to suit cap prongs. |
APPLICATIONS:
Finished assembled Sign One showing
flat caps and multipanels, please note clear lines with no gaps. This minimises
cobwebs, spiders and insects, keeping your sign clean. Its flat faces provide
graphics in your chosen media - vinyl graphics, digital printing, screen
printing and engraving to name but a few.
ENGINEERING SPECIFICATIONS: Should
be sought to ensure size/suitability of the system by the user, prior to use.
GRAPHICS: Text and graphic
techniques we recommend include - pre spaced vinyl computer cut lettering.
Premium brands screen printing, engraving and plain infilling, photo etching,
laser engraving and digital image printing. (see 4409EEE) |