ITEM: MAKING WIRE SUSPENDED DIRECTORY PANELS DESCRIPTION: Hanging wire suspended signs
with 7 stand stainless steel wire to form a "U" for easy leveling.
CONSTRUCTION: Also see
4409EE for
assembly guide
SPECIFICATION: |
STEP 1: |
A Cut frame to required length and
mitre corners to 45o |
STEP 2: |
B Using the Vee groove in the back of
the frame as centre, drill hole to align with screw flute and using a metal thread fixing
screw assemble one end. |
STEP 3: |
B Repeat for other end. |
STEP 4: |
C Drill suitable diameter holes, about
50mm ( 2") 75mm ( 3") in from the edge (or to suit your sign) and thread wire through both
holes. |
STEP 5: |
D Allow suitable hanging length
"X" on both sides of wire, cut to length and swage two (2) swage fittings to end
of wire. |
STEP 6: |
E Glue sign faces to both sides of
frame (see 4409EE
and 4409RRR) |
STEP 7: |
Install suitable fixing to ceiling in position |
STEP 8: |
Once both wires are hanging in place on
ceiling fixing, its very easy to level the sign as the "U" shape wire will slide
through. |
APPLICATIONS: Internal wayfinding in hallways,
building etc Point of Sale aisle destination, directories. |