ITEM: P1485R SIGN ONE 80mm ( 3 1/4")
POST DESCRIPTION: The 80mm ( 3 1/4") round post section of the system offers multiple applications as a sign post, vertical and horizontal carriage holder, panel holder, poster and banner hanging system and a host of other applications. CONSTRUCTION: All Sign One posts, frames and infills are manufactured from extruded aluminium which is an alloy 6060 in the T5 temper and is commonly used for architectural application. This alloy has good structural strength and corrosion resistance. The structural system of Sign One is manufactured from anodised and powder coated aluminium, this gives the system good resistance to corrosion and offers long term resistance to most chemicals in the environment. SPECIFICATION: Available in 6.1 metre
( 20' 4") lengths with each length weighing approx 16 kgs ( 35 lbs). Dimensions as per DIAGRAM A. While its
features are listed in DIAGRAM B.
APPLICATIONS: The posts can be used as a normal vertical sign post, horizontal, projecting sign post, hanging sign holder, can be mitre cut to 90o and virtually any angle as an angular framing system. By using No. 5 the post can be cut to form a bend back sign and post extrusion. No. 2 allows you to slide in a wide range of standard adapters or geometric angles to sandwich almost any flat substrate eg aluminium sheet, plywood, PVC sheet, MDF. No. 3 the central hex opening allows PVC hex rod or 12mm ( 1/2") rod to rotate cut sections of the sign post to form street blades, and also allows the post to be extended. |
|
|