| ITEM: USING FLAT SHEETS IN SIGN ONE 80mm
( 3 1/4") and 100mm POST DESCRIPTION: The flat sheet assembly guide
sets out the method of integrating various flat sheet substrates and the Sign One post.
This guide can be used in both 80mm ( 3 1/4") post and 100mm ( 4")
post.
CONSTRUCTION: Many methods of
construction can be used to integrate flat or fabricated sheets with the post sections
internal twin opposing receptors. (see 4409DD No.
2)
| SPECIFICATION: DIAGRAM A |
| STEP 1: |
A – cut aluminium 90o angles
to required length of sign panels |
| STEP 2: |
B – cut selected sign panel allowing
extra width, which extends into post |
| STEP 3: |
C – use suitable mechanical or glue
fixing to assemble 90o angles to sign panel |
| STEP 4: |
D – slot infill section P1484R with
circular saw or router to required dimension, which should allow the sign panel clearance
and slide into the post. |
| STEP 5: |
E – slide assembled sign panel with 90o
angles into posts twin opposing receptors. |
| SPECIFICATION ALTERNATIVE:
DIAGRAM B |
| STEP 1: |
A – cut "U" channel to suit
thickness of stock and required length |
| STEP 2: |
B – 3mm aluminium flat sheet cut to suit
"Z" and depth of sign |
| STEP 3: |
C – mechanically fix "A" to
"B" |
| STEP 4: |
D – fix sign face into assembled
"A" and "B" |
| STEP 5: |
E – slot infill section P1484R with
circular saw or router to required dimension if required to allow sign panel clearance and
slide into post. |
ENGINEERS SPECIFICATIONS:
Should be sought to ensure size/suitability of the system by user prior to use.
APPLICATIONS: Allows the users to combine Sign One
frame and selected flat sign panels together. Can be used to integrate a wide range of
materials not commonly used in aluminium sign posting i.e. plywood, composite panels,
climbers for engraving, framed signs, rigid aluminium sheets 3mm (
1/8"), 6mm ( 1/4"), 10mm ( 3/8") etc, which
allows freedom of design. |
