ITEM: MAKING BEND BACKS IN SIGN ONE 80mm ( 3 1/4")

DESCRIPTION: The internal opposing adapters (see 4409DD No. 2) allow the post to be cut to almost any angle to "bend back" the sign and post.

CONSTRUCTION: Sign One 80mm ( 3 1/4") posts in full aluminium construction allows the bend back angle to be up to 3mm ( 1/8") thick, we recommend aluminium sheet most suitable for bend back angled pieces.

SPECIFICATION:
STEP 1:

A – select desired angle and cut post to suit – Diagram A

STEP 2: B – mark out angle onto flat aluminium sheet and cut – Diagram A
STEP 3: C – slip "B" into opposing adapters and use mechanical fixings, repeat with other post section.
STEP 4: D – cut infills to suit angles and slide in place into post

PLEASE NOTE: DIAGRAM B shows any angle can be changed by cutting "B" to selected angle.



 KEY:
 3mm = 1/8"

ENGINEERS SPECIFICATIONS: Should be sought to ensure size/suitability of the system by user prior to use.

APPLICATIONS: Free standing information signs where user friendly information, descriptive signs are required. The bend back or lay back can be angled to suit clients of all heights and ages.