SAMPLE
COMPONENTS
The aim of this
price list is to provide users of Sign One Sign Posting Systems various standard
and special design Technical Sheet items in a photo representation, basic
description and price to supply these items ready made.
The complete set of technical sheet samples as listed on
this page can be purchased as a set or individually. Individually the total price is $890.00, however if you buy them as a complete set, purchased at the one time the set is $750.00.
Contact Sign One if you are interested in
purchasing Sign One samples.
 |
Bracket to suit hanging banners and fabric substrates.
Technical Sheet No: SO4409AAA
This bracket can be supplied in 80mm ( 3 1/4" ) or 100mm
( 4" ) post
TOTAL AS SHOWN IN PICTURE = $45.00 |
|
 |
Bend back
in Sign One 80mm ( 3 1/4" )
Technical Sheet No: SO4409BBB
The internal opposing adapters allow the post to be cut to almost
any angle to " bend back" the sign and post.
TOTAL AS SHOWN IN PICTURE = $60.00 |
|
 |
Flat Sheets in Sign One 80mm
( 3 1/4" ) and 100mm ( 4" )
Technical Sheet No: SO4409CCC
Able to integrate various flat sheet substrates and the Sign One post. Flat sheets can be used in both 80mm and 100mm
( 4" ) post.
TOTAL AS SHOWN IN PICTURE = $60.00 |
|
 |
Wire Suspended Directory Panels
Technical Sheet No: SO4409DDD
This hanging wire suspended sign with 7 strand stainless steel wire to form a "U" for easy levelling.
TOTAL AS SHOWN IN PICTURE = $30.00 |
|
 |
90o Mitre corner in Sign One 80mm
( 3 1/4" ) Post
Technical Sheet No: SO4409FF
Internal opposing adapters allow the insertion of an aluminium 90o angle which locks into place for a 90o mitre corner.
TOTAL AS SHOWN IN PICTURE = $55.00 |
|
 |
Brackets to suit Illuminated Signs, Box Framed Signs
Technical Sheet No: SO4409GGG
This bracketing method can be used for both Sign One 80mm ( 3 1/4" ) round and 100mm
( 4" ) square post supplied with mini sign box..
TOTAL AS SHOWN IN PICTURE = $130.00 |
|
 |
Hanging Sign in Sign One 80mm
( 3 1/4" )
Technical Sheet No: SO4409HHH
This sample is supplied with a ceiling plate, hanging post and small section of the post.
TOTAL AS SHOWN IN PICTURE = $65.00 |
|
 |
Projecting Flag Mounts
Technical Sheet No: SO4409MMM
Supplied with base plate, base plate cover, post, cap and sign panel.
TOTAL AS SHOWN IN PICTURE = $85.00 |
|
 |
Street Blades
Technical Sheet No: SO4409KKK
Gives the ability to place more than one sign and rotate the sign to various directions. Supplied with base plate, base plate cover, post, cap and sign panel.
TOTAL AS SHOWN IN PICTURE = $145.00 |
|
 |
Vee Signs
Technical Sheet No: SO4409NNN
It is often desirable to achieve a 3 post installation rather than doubling up on the middle post. This sample is supplied as a post and bracket end.
TOTAL AS SHOWN IN PICTURE = $90.00 |
|
 |
Caps and Base Plate Covers
Technical Sheet No: SO4409OOO
Supply of the software in either Corel, Signlab, Casmate or Inspire files for caps,
baseplate covers and sign blade rotation disc, supplied on 3.5" floppy
TOTAL AS SHOWN IN PICTURE = $45.00 |
|
 |
Post Extension for Sign One 80mm
( 3 1/4" ) Posts
Technical Sheet No: SO4409CCCC
Twin opposing receptors allow the ability to insert 6mm x 32mm aluminium flat bar, or preset post extension into concrete. This sample offers a representation using 3mm.
TOTAL AS SHOWN IN PICTURE = $80.00 |
|
