|
How it works
|
Step 1 - Adhere sign face onto base
A Double sided tape acts as a temporary hold, and pretensions to sign face in the Clips-in base.
B The trigger on the cap, locks against the Clips-in base, firmly holding the sign face in position while tension is applied by the closing of the
cap.
|
|
Step 2 - Close Cap which tensions face
B The trigger tensions while
C The leading edge of the cap applies additional pressure to the sign face by pushing the sign face over the top of D.
D Is a rope slot in the base extrusion.
This can be used if the sign face has a hem or one person is installing the sign |
|